Window screens
Torn, bent or missing window screens fixed or remade
Hamilton summers are long and humid, and a torn screen decides whether the bedroom window stays open at night. Whether it's one bent screen or every screen in a rental house, we connect you with an independent local pro who rescreens old frames and makes new ones to size. It's the same free request either way.
- Rescreening or new frames made to size
- One screen or a whole building
- Screens for old wood windows too

Blown out again?
Screens that pop out in the wind
Wind gets behind a loose screen and lifts it out, and the Mountain gets more wind-whipped weather than the Lower City. It's usually one of these:
Too small for the opening
Off-the-shelf screens leave a gap the wind catches. One made to the opening sits snug.
Bent frame or weak clips
A bowed frame or tired springs won't hold the screen against its stop.
Missing tabs
The small parts that hold a screen in place go missing; a pro can usually match them.
By window type
Screens for casements, sliders and old wood storms
The right screen depends on the window it's for.
Casements and awnings
The screen sits inside, held by clips, since the window cranks out. Stiff crank too? That's window repair.
Sliders and single-hung windows
The screen covers the half that opens, outside or in a track, and frames bend from years of popping in and out.
Old wood windows and storms
Hook-on wood screens and combination storms can be rescreened or remade. See storm windows if the storm itself needs work.
Mesh or frame
New mesh, or a new frame?
Most screens need new mesh, not a new frame. The old mesh and its rubber spline come out, fresh mesh is rolled in, and the screen goes back.
A new frame is for one that's kinked, split at the corners or never fit. It's also the answer for missing screens, made to measure in aluminum or, for older windows, wood.
Choosing mesh
Which mesh: fibreglass, aluminum, pet-resistant or solar
Mix them if you like; the cat's window doesn't have to match the rest.
Fibreglass
The everyday choice: flexible, rust-free and easy to see through, but easier to tear.
Aluminum
Stiffer and harder to tear, though it can crease if it's knocked.
Pet-resistant
A heavier coated mesh that stands up to claws, with a slightly darker view.
Solar
A tighter weave that cuts glare and heat on the sunny side of the house.
Landlords
Bulk rescreening for rentals and multi-unit buildings
A lot of Hamiltonians rent, and screens come up between tenants. Landlords can send a whole house or building in one request, and we'll connect them with a pro set up for bulk rescreening. Our property managers page explains how that works.
The City's rental housing licence is now permanent for smaller rental buildings in Wards 1, 8 and parts of 14, and screens often come up at licensing time. We don't interpret the by-law; our rental licensing guide points to what the City publishes.
Before you ask
What changes the price of screen work
A few things move the quote:
- New mesh or a new frame
- The mesh you choose
- Size, odd shapes, or wood frames on older windows
- How many screens, and how many addresses
- Dropping screens off, or having missing ones measured on site
For a batch, list each screen's window type, rough size and what's wrong with it.
Questions
Window screen questions
Explore your options
Other screen and window jobs
Local pros rescreen and make window screens for houses and rentals across the city, including Westdale, Hamilton Mountain, Crown Point, Kirkendall and Locke Street and Stoney Creek.
How many screens, and what's wrong with them?
Send a count, rough sizes and a photo of the worst one. We'll pass it to a local pro who does screens and follow up so it doesn't go quiet.